Today we’re talking about an interesting gamer’s new headset from Hator – the Hypergang Wireless Tri-mode. This headset should appeal to many gamers (and not only), because at a very loyal price tag it has a lot to offer. It comes with a very good package, removable microphone and ear cushions (!), combined connection, subtle backlighting on the body and a rather interesting and practical design. And it claims to support 7.1 virtual sound, which also looks very, very interesting.
With a price tag starting at $79 the Hator Hypergang Wireless Tri-mode is a fairly affordable gaming headphone that has a combo connection, removable ear cushions, backlighting on the body and a nice package. Looking at the segment of these particular devices, there’s not much cheaper than the model featured in our review. Something can be found from A4Tech Bloody, Trust, Kotion or Lorgar, while all the others (Razer, Edifier, HyperX, SteelSeries, etc.) will cost more. Let’s see what it can do and if it’s worth the money.
The package for the Hator Hypergang Wireless Tri-mode is quite generous. Incidentally, they arrived in a bright yellow branded box, which is already an eye-catcher in itself. But the inside is much more interesting.
Here we have a gaming headset with two pairs of ear cushions. One is made of mesh textile, which provides good breathability when in use. The others are made of leatherette. They look nicer and provide better soundproofing, but they tend to sweat underneath if you listen for long periods of time. I like the textile ones much better in this respect, but that is a matter of taste. And it’s good that the user has a choice. And you can also buy an extra pair of ear cushions.
There’s also a USB-A to USB Type-C cable for wired connection, a 2.4GHz adapter and an adapter for the USB-A to USB Type-C adapter (female-female), which comes in handy if the system is standing a bit far away, for example. The cable can be brought out onto the table and the adapter connected to it to reduce the distance to the receiver and interference.
Read also: ROG FUSION II 300 gaming headphones review: immersive sound
Even though this is still a gamer’s device, Hator has combined studio and gaming headphone styles here. It’s a massive full-size headset with illuminated logo and a metal frame. The latter makes them weigh around 290g and feel sturdy and durable.
The headband is upholstered in quality leatherette and there is foam on the inside. There’s embossed brand logo on top and neat outer seams around the edges that frame the ends beautifully.
The bowls, on which the ‘L’ and ‘R’ are stamped on the inside, as well as the lower parts of the headband, are plastic and have a pleasant soft-touch coating. The bowls are mounted on carved metal brackets, which give the design a light and airy feel. The wire is led outside, which gives Hator Hypergang Wireless Tri-mode some resemblance to the studio models. The cable, by the way, has a tight fabric braid, so you don’t have to worry about its integrity.
The shape of the cups is a flat rectangle with rounded corners. This flatness prevents unnecessary bulk on your head when you put the headphones on, and makes them look neater. Their main attraction is the logo with integrated RGB backlighting that can be directly controlled by a button on the housing. You can switch the dynamic backlighting on or off to save battery life. In my opinion, this is very well thought out and you don’t need any utilities – everything is much simpler and can be done with one button.
In general, the headphones look great and, to me, more expensive than their real price. This is helped by the high quality build and materials. Their design is not overly aggressive, which is common to many gaming accessories, and the Hator Hypergang Wireless Tri-mode looks quite restrained, mature, but stylish.
The elasticity of the headband ensures that the headphones stay firmly in place on your head, so they won’t fall off during sudden changes in position. Naturally, its size is adjustable. The headset provides a good fit and is comfortable to wear for hours on end. The ear cushions are soft and big enough that your ears sink completely into them when you put them on. It isn’t difficult to fit them, but it does take some skill to change them. However, it’s likely that you will get the pair that you like best (mine are textile ones) and it won’t be long before you change them next time.
But there are a few more items in the Hator Hypergang Wireless Tri-mode that make them more convenient and versatile to use.
All in all, a quick summary: the headphones are a 10 out of 10, with plenty of usage scenarios and everything possible.
As the headset has three connection types, the controls are slightly different for each. The most extensive controls on the body are provided for Bluetooth mode, so let’s look at that.
Let’s not talk about the “+” and “-” buttons to adjust the volume – that’s self-explanatory. Let’s concentrate on the less obvious things. For example, the power button on a Bluetooth connection acts as Play/Pause and pick up/put down on an incoming call. The volume buttons also allow you to switch between tracks: a double press of the “+” will take you to the next track, the “-” will take you to the previous track. Holding the microphone on/off button for 3 seconds puts the headset in pairing mode – a feature available for both Bluetooth and 2.4 GHz. Incidentally, for any wireless connection, switching between 2.4 GHz and Bluetooth mode is done by double pressing the “7.1” button.
As for the backlight, it has three modes (flicker, static or off) and switches the same way for all connections. At first, the controls may look a little confusing, because there are some conditions for the different types of connection, but they are quite logical and it’s enough to understand them once to do everything on automatic afterwards. The manufacturer, by the way, encloses detailed instructions for each connection.
Bluetooth connection:
2.4 GHz radio channel:
Cable:
The Hator Hypergang Wireless Tri-mode uses 53mm neodymium magnet drivers that reproduce frequencies from 10Hz to 22,000Hz. Virtual 7.1 surround sound is also claimed, but is only available when connected via radio or wire – no such luxury for Bluetooth.
Incidentally, this also applies to sound quality – the best can be achieved with a wired connection or via 2.4 GHz. Bluetooth is a good alternative for mobile devices, but the sound is the simplest here. It’s not bad and it’s good enough for watching videos or playing mobile games, but for a more vivid experience it’s better to use the first two options.
What do we have in terms of sound? In what the headphones were originally designed for – gaming – they are excellent: the sound is detailed, volumetric and accurate, you can hear the enemy approach without any problems. But 7.1 sound in games doesn’t make much difference – the standard mode handles just as well and provides more natural sound without some distortion. But whether to use it in games or not is more a matter of taste.
In music, the headphones show themselves in a positive light, too. When listening to tracks, the sound is clear and surround even in stereo mode, but with the addition of the Virtual Enhancer it becomes more vivid and atmospheric. I like it best in instrumental music, where you can hear each part separately, but it depends not only on the genre, but also on the track itself. Despite the fact that I use streaming services for music, I was more than happy with the sound. They also proved to be awesome when watching films. That’s where I think 7.1 sound is at its best. Watching action movies with headphones is really more immersive, creating a more vivid sense of presence.
The Hator Hypergang Wireless Tri-mode’s voice transmission is fine. And it would be strange if it wasn’t. Even if you receive an incoming call with a Bluetooth connection, the caller can hear you well and clearly, but in some cases the volume is a little low. With a wired connection, for example, there are no such issues – the cable is still the more reliable option. But when paired with a smartphone it’s also a pretty usable option, which is a head above, say, an inexpensive TWS as a headset.
The battery here is 750 mAh. It provides up to 28 hours of battery life when connected via radio and up to 40 hours when connected via Bluetooth. These figures are quite confirmed in practice – in four evenings using the headphones via Bluetooth for about 2 hours at around 70-80% volume, the Hator Hypergang Wireless Tri-mode drained by 20%. If you spend 6-8 hours a day in the headset with Bluetooth connectivity, they will last for a week. With a radio connection, this will be about 1.5 times less, but that’s pretty good too. In any case, the wired connection has not been cancelled. As for the charging time, you should allow for about 2.5 hours.
The Hator Hypergang Wireless Tri-mode is a good, inexpensive and, for me, a versatile headset. It’s perfectly adapted for gaming and offers excellent sound and voice transmission with virtually no lag. But I can also recommend it for listening to music and movies – the headphones have nice stereo at the start, but the virtual 7.1 sound makes the sound even more atmospheric and vibrant. Technically, the Hator Hypergang Wireless Tri-mode can also be used for work calls, so the thing is really versatile.
Separately, the quality of the materials, the build, and the design, which is more restrained than many gaming headsets, but quite attractive. They also come with a good package – they have everything you need and more. The combined connection type allows you to combine them with any device (consoles, laptops, smartphones), and the interchangeable ear cushions are a delight. Considering the rather moderate price tag, this is a great model for leisure time, however you spend it.
Read also:
Leave a Reply