ID-COOLING FROZN A410 GDL cooler review

Each time I review liquid cooling systems – whether from ID-COOLING or other manufacturers – I note the rapid pace of technological development in this segment. However, this trend also applies to tower air coolers. The ID-COOLING FROZN A410 GDL serves as a relevant example. In terms of price-to-performance ratio, the model offers a competitive balance, although it is not without several limitations.

TABLE OF CONTENTS:

Technical specifications

Radiator dimensions: 120×104×152 mm
Weight: 930 g
TDP: 230 W
Plate material: Aluminium
Number of plates: 52
Heat pipes: 4×6 mm
Dimensions, own measurements: 120×47×152 mm
Base dimensions: 38×38 mm
Fans: 2 × ID-COOLING AF-127-GDL
Dimensions: 120 × 120 × 27 mm
Fan bearing type: hydrodynamic
Rotation speed: from 500 to 2000 RPM +-10%
Maximum noise level: 29.9 dBA
Maximum airflow: 78 CFM (132.6 m3/h)
Maximum static pressure: 2.68 mm H2O

Price and Market Positioning

The listed price is approximately $30 / €25. This places the model in the budget segment, although close to the lower end of the mid-range category. The A410 series includes more variations than may be immediately apparent. The ID-COOLING FROZN A410 is available in three color options: white, black, and black with gold accents.

The model is also available in a TD variant, which includes a display integrated into the end cap of the heatsink. Versions with RGB lighting are offered under the ARGB designation and are likewise available in multiple color options. In addition, there is an SE configuration supplied with a single fan. An RGB-equipped SE version is also available.

There is also a DK version, the specific differences of which are not clearly defined in the available materials. Across the lineup, these variants differ in price, additional features, and in some cases rated TDP. However, their core specifications remain largely similar, which will be examined further below.

Package Contents

The A410 GDL package includes the heatsink, two fans, a tube of Frost X25 thermal compound rated at 10.5 W/m·K, and mounting hardware compatible with Intel LGA1851/1700/1200/115X and AMD AM4/AM5 sockets.

ID-COOLING FROZN A410 GDL

1 - 3

Compatibility with LGA1155 is now relatively uncommon among new cooler releases, making its inclusion somewhat notable. The package also contains a fan power splitter and a vibration-dampening pad with four pre-cut triangular sections.

The manual does not reference this pad, likely because vibration dampers are already pre-installed on the fans. In practice, this omission does not significantly affect installation or operation.

Fans

The included fans are ID-Cooling AF-127-GDL units. They measure 120 mm in height and have a thickness of 27 mm, which is slightly greater than the more common 25 mm standard. The operating speed ranges from 500 to 2000 RPM. According to the manufacturer, the use of a hydraulic (fluid dynamic) bearing allows the maximum noise level to be limited to 29.9 dBA.

The specified maximum noise level remains just below the 30 dBA threshold. In terms of performance, the fans are rated for an airflow of up to 78 CFM and a maximum static pressure of 2.68 mm H₂O, which are typical figures for this class of 120 mm performance-oriented fans.

What the fans – and the heatsink itself – lack is any form of RGB lighting. The ID-COOLING FROZN A410 GDL does not include illumination; its only design accents are gold stripes and decorative elements on the fan frames and the heatsink end cap. For models with RGB, the A410 ARGB variant should be considered, while the TD version includes only an LED display rather than full RGB lighting.

Design and Specifications of the ID-COOLING FROZN A410 GDL

The A410 GDL presents a clean and professional appearance. It features an all-black finish and measures 152 mm in height – a dimension consistent across all A410 variants. The rated TDP for this model is 230 W, although some versions within the series are specified at 180 W.

A rated TDP of 230 W corresponds roughly to an overclocked 12-core processor on a modern socket, to provide some context. This level of thermal performance is supported by several design features: dual 27 mm fans, four 6 mm heat pipes, and a direct-contact base plate. Together, these elements suggest that the ID-COOLING FROZN A410 GDL is capable of meeting its stated cooling potential.

Regarding installation, most aspects are straightforward and predictable. The exception is the fan mounting clips, which proved to be very stiff and difficult to manipulate. With the motherboard already secured in the case, it was not possible to attach or remove the fans by hand; pliers were required to handle the clips safely.

It is generally recommended to install any tower cooler before mounting the motherboard in the case. This advice primarily applies to new builds; in most reassemblies, removing the motherboard is usually unnecessary. The key takeaway is to have pliers on hand, just in case.

On a positive note, RAM clearance is not an issue: the fan does not obstruct even the first memory slot.

Test bench and results

Processor: AMD Ryzen 9 9900X
Motherboard: ASUS ROG Strix B650E-E Gaming WiFi
RAM: Kingston Fury 16GB 6000 MTX
Case: ASUS TUF Gaming GT502
Power supply: be quiet! Power Zone 2 1000W

Testing with a 125 W processor at stock frequencies yielded very strong results. Peak temperatures reached 70 °C with an ambient of 20 °C, while the fans ran at 1280 RPM. With the case closed, it was difficult to tell whether the stress test was still running or had already completed.

After locking all cores at 5.3 GHz, fan speeds increased to 2100 RPM, and peak temperatures reached 96 °C. The cooler was able to dissipate up to 218 W, falling slightly short of the advertised 230 W but still very close.

Conclusions

The ID-COOLING FROZN A410 GDL demonstrates what can be achieved when the focus is placed on performance rather than RGB aesthetics. Priced modestly, it is capable of cooling a 12-core processor under overclocked conditions and presents a professional appearance suitable for both budget builds and more premium setups, such as a black-and-gold ASUS ProArt workstation. Overall, it offers a strong balance of performance and design for its segment.

Read also:

Package contents 9
Design 9
Versatility 9
Performance 10
Price 9

ID-COOLING FROZN A410 GDL Сooler Review: Invest in Performance, not RGB